离子色谱-双阳极电化学氢化物发生-原子荧光光谱法测定Ⅰ型牙髓失活材料中的砷形态

将自制的双阳极电化学氢化物发生器作为离子色谱与原子荧光光谱的联用接口,建立了离子色谱-双阳极电化学氢化物发生-原子荧光光谱法在线分析砷形态系统.最佳实验条件为淋洗液6.0 mmol/L NH4H2PO4(pH 6.20),电解液0.40 mol/L H2SO4,电解液流量为阳极4.0 mL/min,阴极 1.5 mL/min,电解电流密度0.50 A/cm.2,载气流量300 mL/min,屏蔽气流量500 mL/min,氢气流量80 mL/min.在优化的实验条件下,As(Ⅲ)、DMA、MMA的线性范围为5～200 μg/L、As(Ⅴ)的线性范围为10～200 μg/L,As(Ⅲ)、DMA、MMA和As(Ⅴ)检出限分别为3.04、4.27、3.97和9.30 μg/L(信噪比S/N=3).50 μg/L的As(Ⅲ)、DMA、MMA和As(Ⅴ)混合标准溶液平行进样7次,得到的色谱峰面积的相对标准偏差(RSD)分别为415%、3.08%、519%和3.62%.将该方法用于牙髓失活材料中的砷形态分析.     

气相氟化合成1,1,1,2-四氟乙烷的CrOx-Y2O3催化剂的表征与性能

制备了一系列CrOx-Y2O3催化剂用于气相氟化1,1,1-三氟-2-氯乙烷(HCFC-133a)合成1,1,1,2-四氟乙烷(HFC-134a), 并考察了Y(OH)3、YCl3和Y(NO3)3前躯体对催化剂性能的影响. XRD和UV-Vis光谱实验结果表明, Y前躯体对催化剂表面Cr物种有影响, 其中采用Y(OH)3前躯体的催化剂有利于以高分散的Cr6+形式存在. 研究表明CrOx-Y2O3催化剂在预处理和反应过程中, 部分高价CrOx可转化为CrF3. 催化剂中CrF3含量增加, 导致其转化为活性物种的含量相对减少, 所以其催化活性下降.     

Synthesis, photophysical properties and sugar-dependent in vitro photocytotoxicity of pyrrolidine-fused chlorins bearing S-glycosides

Eight S-glycosylated 5,10,15,20-tetrakis(tetrafluorophenyl)porphyrins (1a′, 1b′, 1a and 1b (a: S-glucosylated, b: S-galactosylated)) and their 1,3-dipolar cycloadducts, i.e. chlorins 2a′, 2b′, 2a and 2b were prepared by nucleophilic substitution of the pentafluorophenyl groups with S-glycoside. These photosensitizers were characterized by ¹H, ¹³C and ¹⁹F NMR spectroscopies and elemental analysis. The photocytotoxicity of the S-glycosylated photosensitizers and the parent porphyrin (1) and chlorin (2) was examined in HeLa cells. Photosensitizers 1, 2, 1a′, 1b′, 2a′ and 2b′ showed no significant photocytotoxicity at the concentration of 0.5 μM, while the deprotected photosensitizers 1a, 1b, 2a and 2b were photocytotoxic. The strong inhibition by sodium azide of the photocytotoxicity of these photosensitizers suggested that ¹O₂ is the main mediator. The S-glucosylated photosensitizers 1a and 2a showed higher photocytotoxicity than S-galactosylated 1b and 2b, respectively. The cellular uptake of 1a and 2a increased up to 24 h, while that of 1b and 2b was saturated by 12 h.     

Electrochemical Determination of Organic Compounds in Automotive Fuels

This article critically reviews the electroanalytical methods devoted for the determination of organic compounds in automotive fuels that can range from contaminants to additives typically introduced into liquid biofuels and liquid fossil fuels. Contaminants such as aldehydes and ketones in bioethanol, free fatty acids and glycerol in biodiesel, and sulfur and nitrogen organic compounds in gasoline and diesel fuel, and additives such as colour markers and antioxidants added to fuels were determined by electroanalytical methods. Special focus is given to electrodes, electrochemical techniques, and sample preparation strategies. Future directions of research on electroanalysis of liquid fuels are presented.     

Dephosphatation under UV light of water by Ti-PILC with activation by secondary species (La,Se, and Rb)

Me/Ti-PILC catalysts (Me: La, Se, Rb) were prepared with 60% in weight of Ti-species and 3% in weight of Me-secondary species added under ultrasounds. All materials were characterized by XRF, XPS, XRD, BET, HR-TEM/EDS, FEG-SEM and UV-vis. Three kinds of Ti-oxide nanoparticles were identified: (1) Ti-pillars within the clay layers, (2) rutile nanoflowers, and (3) anatase. In UV-vis spectra, no significant change in the band-gap was observed. In La and Se samples, small variations of the anatase XRD lines are associated with cationic diffusion after deposition of secondary species and calcination. An O1s XPS-peak (533.5 eV) is attributed to oxygen vacancies generated by this diffusion. Phosphate photo-removal in water was studied using phosphoric acid solution (75.97 g L⁻¹). Dephosphatation is significantly improved in the presence of Me-species as La/Ti-PILC > Se/Ti-PILC > Rb/Ti-PILC > Ti-PILC. Partial dephosphatation by adsorption is possible in the dark but is strongly improved by UV irradiation. With a La catalyst and under UV irradiation, phosphates (6.6 × 10⁻³ mol L⁻¹) were recovered in less than 70 min. Therefore, Me/Ti-PILC have a great potential as photocatalysts for the treatment of wastewaters and the recovery of phosphates.     

Analysis of the antioxidant activity of an indole library: cyclic voltammetry versus ROS scavenging activity

The electrochemical behavior of an indole library of compounds, including several tryptophan and tryptamine derivatives previously demonstrated to be active against several reactive oxygen species (ROS), was investigated. For this purpose, a voltammetry study was undertaken and the oxidation potential was correlated to the scavenging activity reported for the studied indoles. All the compounds showed an oxidation potential peak lower than that observed for indole (Epox = 1.035 V), but higher than that described for the antioxidant melatonin (Epox = 0.715 V). The electrochemical behavior showed a high correlation with the scavenging activity of peroxyl radical, for selected compounds.     

Surface-functionalized Carbon Black as Catalyst for the Direct Production of Hydrogen Peroxide by the Oxidation of Hydroxylamine

Carbon black (CB) without micropores was functionalized by mixed acid and used to explore the surface chemistry effect on the production of hydrogen peroxide (H₂O₂). The CB materials were characterized by N₂ adsorption‐desorption, XRD, SEM, FTIR, and TPD. The results of different characterization methods indicated that both the textural features and the surface chemical properties of CB were significantly modified by the acidic treatment. The catalytic performance of the modified CBs for hydroxylamine (NH₂OH) oxidation increased with increasing the surface oxygen‐containing species. The yield of H₂O₂ approached 30% with the corresponding concentration of 73.9 mmol·L^?1 (w=0.25%) over the most promising CB catalyst, which was much superior to the results obtained on supported noble metals. Correlations between catalytic activity and concentration of different surface functional groups on the CB samples confirmed that the quinonoid species might be the active species.     

Characterization and photoluminescence properties of some MLn2(1−x)O4:2xEu or 2xTb systems (M=Ba or Sr, Ln=Gd or La)

BaGd₂O₄, BaLa₂O₄ and SrLa₂O₄ powders doped with different concentrations of Eu³⁺ or Tb³⁺ are prepared by combustion synthesis method and the samples were further heated to 500, 700 and 900 °C to improve the crystallinity of the materials. The structure and morphology of materials have been examined by X-ray diffraction and scanning electron microscopy. It is remarkable that all the samples of BaGd₂O₄, BaLa₂O₄ and SrLa₂O₄ have similar morphology. The SEM images show homogeneous aggregates of varying shapes and sizes, which are composed of a large number of small elliptical shaped crystallites with an average diameter of about 0.5-3.0 μm. Photoluminescence for all materials increases with increase of temperature and shows a maximum for the samples heated to 900 °C with 4 mole% doping of Eu³⁺ or Tb³⁺ ions. The luminescence is almost same for all powders when doped with same concentration of Eu³⁺.